| 外表完全扫描 |
| 一次扫描，EVI使曩昔无法完成的螺栓孔多层反省。EVI的外表图像，查验多层或层叠质料的螺栓孔更明晰。 |
|
高速外表扫查 差动线圈及时情况使得EVI 量化微分和相对的线圈外表 靠近，从而进步和验证反省 的无效性。. |
|
平头铆钉外表扫查 由于金属外表在飞机布局铆 钉或紧固件地位，裂纹产生 在铆钉和紧固件之间。 |
|
焊缝外表和近外表扫查 装备uniwest ecs-3s高速扫 描仪. |
- 根本参数
- 使用
- 配件
- PDF产品信息
|
美国uniwest涡流航空检测仪,EVi UNIWEST EVi-随着外表成像的功效优化uniwest探伤无与伦比的精度 |
|
UNIWEST EVi-随着外表成像的功效优化uniwest探伤无与伦比的精度 |
|
为了坚持j9九游会不停进步无损检测的精度和服从的传统，uniwest的电子商务办理方案团队开辟的技能最 先辈、操纵浅易的便携式涡流检测体系— the EVi。 Evi好处：
产业使用：
|
|
工程由uniwest EC办理方案团队，在美国制造，EVi间接与探头和附件的eddyview。 uniwest无与伦比的阵列的尺度和可选的信号处置，读出，数据存储、报警和表现。 功效设置机动使用的一个新的尺度，利用利便，数据的表明和全体操纵的正确度比以往 任何时分都大概在一个便携式检测体系。 |
GENERAL
Dimensions
• (WxHxD): 13.8" x 8.75" x 2.58"
• Weight: 7 lb 0 oz without batteries, 9 lb 2 oz with 2 batteries Display Size and Resolution
• 10.1" WXGA 1280x800 pixels Operating temperature
• 0 – 45ºC minimum when the battery is charging. 50ºC when operating with a battery or AC but not both.
MEASUREMENTS
• Frequency Range: 120 Hz to 15 MHz
• Gain: 0 dB to 114 dB in 0.1 dB steps
• Rotation: 0 degrees to 359.9 degrees in 0.1 degree steps
• Sweep: 0.001 second to 10 second per division
• Low Pass Filter: 0 to 10 kHz adjustable to 3 digits of precision
• High Pass Filter: 0 to 10 kHz adjustable to 3 digits of precision
• Probe Drive: 2 Vp-p, 4 Vp-p, 7 Vp-p (Also variable from 0 to 7 Vp-p in 1 percent steps)
• Probe Coupling: Monitors the probe to part coupling of a differential probe.
I N P U T S / O U T P U T S
• Power connector: 2.5mm IP68 Locking Connector
• Scanner/Probe Connector: 27 Pin IP68 Connector
• Probe types: Absolute and differential in either bridge or reflection configuration
• X and Y Analog Outputs: 2 SMA connectors for differential, absolute, or combination
• DB25 connector: 8 configurable encoder, sync or other inputs, 8 configurable alarm, multiplexer, or other outputs,
2 dedicated alarm outputs – TTL and open collector
• Alarm outputs: TTL & Open Collector (multi I/O), Audio or Headphone (USB to 3.5mm adaptor)
• Video output: USB will support external monitors (VGA, DisplayPort, or HDMI with adaptors)
• Ethernet: Remotely control the instrument and retrievedata in real time.
• USB port A: Interface to storage devices, keyboard
• USB OTG: Interface to OTG storage devices
• Exportable Files: Report files, data files, settings files
POwER
• Power adaptor requirements: 100-240VAC, 1.4A max
• Power connector: 10VDC-24VDC
• Available batteries: 1 or 2 Lithium DR202i or compatible
• Battery operating time: 5 hours minimum with most scanners, 4 hour recharge rate.
• Battery protection: SMBus V1.1 safety features. Monitor battery thermistors, disconnects, and circuit protection.
Batteries are hot swappable.
• Battery Charging: Instrument will charge batteries using external power